Brass wall sconce lighting a warm café interior - Ember Lighting

How High to Hang a Wall Sconce: A Room-by-Room Guide

A well-placed wall sconce makes a room feel warm and finished. Hung too low, it glares; too high, it lights the ceiling instead of the room. The good news is that a few simple guidelines work in almost every home. Use them as a starting point, then adjust for your ceiling height, furniture and the size of the fixture.

The general rule: about 60 to 66 inches from the floor

For most rooms, designers mount wall sconces so the centre of the fixture sits roughly 60 to 66 inches (152 to 168 cm) above the finished floor. That puts the light just above eye level for most adults, so it washes the wall with a soft glow without shining straight into anyone's eyes.

In rooms with tall ceilings (10 feet or more), you can move sconces a few inches higher so they stay in proportion with the wall. In rooms with low ceilings, stay towards the lower end of the range.

Hallways and entryways

  • Height: 60 to 66 inches to the centre of the fixture.
  • Spacing: roughly every 8 to 10 feet (2.4 to 3 m) along a long hallway, so the pools of light overlap gently.
  • Depth: in narrow hallways, choose a slim sconce that doesn't stick out too far from the wall, so people don't brush against it.

Compact brass wall sconces with a slim profile work especially well here, such as our Slim Brass Wall Sconce with Extended Arm.

Slim brass wall sconce with extended arm for narrow hallways - Ember Lighting
Shown: Slim Brass Wall Sconce with Extended Arm

Living rooms

Sconces in a living room are usually accent lighting, layered with lamps and ceiling lights. Mount them at the standard 60 to 66 inches, and use them to frame a fireplace, a sofa, a shelf or a piece of art. When you place a pair, keep them evenly spaced from the centre of whatever they frame.

A tall, sculptural design such as our Tall Italian Brass Wall Sconce makes a striking accent on either side of a fireplace or mirror.

Tall handmade Italian brass wall sconce - Ember Lighting
Shown: Tall Italian Brass Wall Sconce

Bedrooms and bedside reading

Bedside sconces are the exception to the standard height, because you use them while sitting or lying down.

  • Height: a common guide is to place the bottom of the shade around 20 to 24 inches above the top of the mattress, which for many beds works out to roughly 48 to 60 inches from the floor.
  • Side to side: centre each sconce over the nightstand, or a few inches inside the edge of the bed, so the light falls on your book rather than your pillow.
  • Tip: sit up in bed and hold a book where you normally would. Ask someone to hold the sconce against the wall at a few heights before you mark the spot.

Adjustable designs, such as a gooseneck reading sconce or a swing-arm light, make it easy to aim the light exactly where you need it. Pleated fabric shades, like our Brass Wall Sconce with Green Pleated Shade or the Brass Wall Sconce with Pleated Shade, give a softer, more diffused glow for winding down at night.

Brass wall sconce with green pleated shade for bedside lighting - Ember Lighting
Shown: Brass Wall Sconce with Green Pleated Shade

Bathrooms and vanity mirrors

For flattering, shadow-free light at a mirror, the best option is a sconce on each side rather than a single light above.

  • Height: about 60 to 66 inches from the floor, roughly at face height.
  • Spacing: mount the pair around 30 to 40 inches apart, on either side of the mirror.
  • Above the mirror: if there's no room at the sides, mount a single fixture a few inches above the top of the mirror.

For a smaller mirror, a double-arm sconce centred above it spreads light to both sides from a single fixture. Try our Double Arm Brass Wall Sconce – Cream Pleated Shades, also available with grey pleated shades.

Double arm brass wall sconce with cream pleated shades - Ember Lighting
Shown: Double Arm Brass Wall Sconce – Cream Pleated Shades

Check that any fixture used in a bathroom is suitable for that location, and follow your local electrical code for damp areas.

Stairs

On a staircase, keep every sconce at the same height above the stair it sits over, so the line of lights follows the slope of the stairs. Around 60 to 66 inches above the edge of the step is a good guide.

Before you install

  • Check the size of the fixture. Measure from the centre of the mounting plate, not the top or bottom, when you use the heights above.
  • Hardwired or plug-in? Hardwired sconces need a junction box in the wall and should be installed by a qualified electrician. Plug-in versions are a great option for renters or when there's no wiring where you want the light. Our guide to hardwired vs plug-in wall sconces compares the two.
  • Think about the bulb. Warm white bulbs (around 2700K) suit brass fixtures and create a cozy, inviting glow. See our guide to choosing light bulbs for more.

Find the right sconce for your space

Every Ember Lighting sconce is handmade to order in solid brass, and most designs are available hardwired or as a plug-in, in seven handcrafted finishes. Browse our full range of brass wall sconces, or contact us if you'd like help choosing a size or finish for your room.

Back to blog