Brass gooseneck sconce with exposed filament bulb - Ember Lighting

Choosing Light Bulbs for Brass Fixtures: Colour, Brightness and Bulb Types

The right bulb can make a brass light look its best, and the wrong one can make even a beautiful fixture feel harsh or dim. Here's how to choose the colour, brightness and bulb type for your Ember Lighting fixture.

1. Colour temperature: go warm

Colour temperature is measured in kelvins (K). The lower the number, the warmer and more golden the light.

  • 2200K to 2700K (warm white): a cozy, golden glow that makes brass look rich and warm. Our top pick for bedrooms, living rooms and most sconces.
  • 3000K (soft white): slightly crisper, good for kitchens and bathrooms where you want a little more clarity.
  • 4000K and above (cool white): bright and bluish. It tends to make brass look flat or grey, so we don't recommend it for decorative fixtures.

2. Brightness: lumens, not watts

With LED bulbs, brightness is measured in lumens. As a rough guide:

  • About 250 to 450 lumens (similar to an old 25 to 40W bulb): soft accent light for bedside sconces and hallways.
  • About 450 to 800 lumens (similar to 40 to 60W): general light for living rooms, reading and pendants over a table.

Always stay within the maximum wattage for your fixture, and choose LED where possible. LEDs run cooler, which is kinder to fabric shades and natural stone.

3. Bulb base: which type do I need?

The base is the part that screws or pushes into the socket. On our product pages you'll see it in the Wiring & Bulb Socket Type option, for example “Hardwired/E26”.

Base What it is Common in
E26 Standard medium screw base (26 mm) Canada and the US. The everyday household bulb.
E14 Small screw base (14 mm) The UK and Europe
E12 Candelabra screw base (12 mm) Compact fixtures and some table lamps
G9 Small two-pin push-in capsule bulb Fixtures with compact glass or stone shades

If you're in Canada or the US, choose an E26 option where it's offered, as these bulbs are the easiest to find. Some designs, including several of our alabaster sconces and table lamps, use E12 or G9 bulbs to suit their compact shades.

4. Exposed bulbs: make them decorative

Some of our designs leave the bulb visible beneath the shade. For these, a filament-style LED (sometimes called an Edison bulb) looks beautiful, with a warm glow and visible filaments. A frosted or opal bulb gives a softer, more diffused look if you prefer less sparkle.

Brass gooseneck wall sconce with dome shade and exposed filament bulb - Ember Lighting
Shown: Brass Gooseneck Wall Sconce with Dome Shade

5. Dimming

If your hardwired sconce is on a dimmer, use dimmable LED bulbs and a dimmer switch designed for LEDs. This avoids flicker and buzzing and lets you take the light right down for evenings.

Quick recommendations

  • Bedside sconce: 2700K, about 250 to 450 lumens, dimmable if hardwired.
  • Hallway sconces: 2700K, about 300 to 450 lumens.
  • Pendant over a table or island: 2700K to 3000K, about 450 to 800 lumens.
  • Alabaster or stone shade: 2700K, to bring out the stone's warm tones.

Lit brass cone pendant with alabaster finial and warm bulb - Ember Lighting
Shown: Brass Cone Pendant with Alabaster Finial

Bulbs aren't included with our fixtures, so you can choose exactly the light you want. Have a question about which bulb suits your fixture? Get in touch, and we'll be happy to help.

Back to blog